HP 7000 dl Router Series Guía de usuario Pagina 149

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 941
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 148
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 149
show ip igmp groups <group-address>
Use the show ip igmp groups command to display the multicast groups that have been registered by
directly connected receivers using IGMP. If no group-address is specified, all groups are shown with this
command.
Syntax Description
<group-address> Optional.
IP address of a multicast group.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is sample output from this command:
>enable
#show ip igmp groups
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
172.0.1.50 Loopback100 00:42:57 00:02:50 172.23.23.1
172.1.1.1 Ethernet0/1 00:05:26 00:02:51 1.1.1.2
172.1.1.1 Loopback100 00:42:57 00:02:51 172.23.23.1
Vista de pagina 148
1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 940 941

Comentarios a estos manuales

Sin comentarios