HP Netserver 5971-0821 Manual de usuario descargar pdf (Pagina 39)

adpu160m.sys Error Messages

The following error messages are listed sequentially according to the last three

digits of the error message. For example, [xxxxx010], [xxxxx011], [xxxxx012],

etc.

NOTE When reporting problems to HP Customer Support, be sure to include

the complete error message in your problem description.

[xxxxx004] Command completed with error

[xxxxx005] Command completed with error

[xxxxx006] Command completed with error

A request issued to a target device completed with indication that there is an

error. In most cases, the error is recovered and normal operations continues.

[xxxxx010] Error issuing command

An error has occurred while the driver was setting up its internal data structures.

[xxxxx011] Error issuing command

The requested command is not supported by this driver.

[xxxxx012] Error issuing command

[xxxxxx99] Error issuing command

The driver does not recognize the target device.

[xxxxx021] Target device protocol error

An unexpected event occurred during data transfer between the adapter and

target device. Normally, this indicates a faulty or non-compliant target device.

[xxxxx022] Adapter or target device protocol error

The adapter or target device has broken the communication protocol. A badly

behaving device could cause this message to appear. Normally this is not a

serious problem. If you get this message frequently over a short period of time,

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Sin comentarios

HP Netserver 5971-0821 Manual de usuario Pagina 39