Hp EVA Array iSCSI Connectivity Option Manual de usuario Pagina 157

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 229
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 156
Authority Admin session
Syntax
set ntp
Parameters
port_num: The number of the iSCSI port to be congured for iSNS.
Examples
The following is an example of the Set NTP command:
mpx100 (admin) #> set ntp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
NTP (0=Enable, 1=Disable) [Enabled ]
TimeZone Offset from GMT (Min=-12hrs,Max=12hrs) [-8 ]
IP Address [0] [0.0.0.0 ] 20 7.126.9 7.5 7
IP Address [1] [0.0.0.0 ]
IP Address [2] [0.0.0.0 ]
All attribute values that have been changed will now be saved.
Set Properties
command
Congures both
the Inactivity Timer and the CLI Prompt name.
Authority Admin session only
Syntax
set propertie
s
Examples
The following is an example of the set properties command:
mpx100 (admin) #> set properties
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
CLI Inactivty Timer (0=Disable, 1=15min, 2=60min) [15min ] 1
CLI Prompt (Max=32 Characters) [mpx100 ] mpx100
All attribute values that have been changed will now be saved.
Set SNMP command
Congures the general SNMP properties. Also congures up to eight trap destinations.
EVA iSCSI connectivity user guide
157
Vista de pagina 156
1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 228 229

Comentarios a estos manuales

Sin comentarios