Hp NC112T PCI Express Gigabit Server Adapter Manual de usuario descargar pdf (Pagina 11)

Specifications 11

Specifications

HP NC112T PCI Express Gigabit Server Adapter

specifications

Specification Value

Network Controller Chipsets Intel® 82574L

Bus Type x1 PCI Express v1.1 (2.5 GTps)

Bus Width One lane (x1)

On-board Memory 32 KB

Data Transfer Method Bus Master DMA

Boot ROM Support Yes

Management Capabilities WOL, PXE 2.2, ACPI 1.0 (Note: WOL and PXE are set to the default of off)

Power Requirement 575 mA @ 3.3 VDC max

Data Transmission Rate 10 Full/10 Half, 100 Full/100 Half, 1000 Full

Standards Supported IEEE 802.3u, IEEE 802.3x (flow control), IEEE 802.3ad (link aggregation), IEEE

802.1p (QoS), IEEE 802.1q (VLAN tagging), IEEE802.3z, IEEE802.3ap,

IEEE802.3ae

Dimensions 11.93 cm x 5.58 cm [4.7 in x 2.2 in (L x W)] (without bracket)

Connector and Distances 10BASE-T: Category 3, 4, or 5 UTP 100 M (328 ft)

100BASE-TX: CAT5 UTP 100 M (328 ft)

1000BASE-TX: CAT5 UTP 100 M (328 ft)

Interrupts Supported Automatically configured

Temperature Range Operating: 0°C to 55°C (32°F to 131°F)

Storage: -40°C to 85°C (-40°F to 185°F)

Relative Humidity (non-

condensing)

Operating: 10% to 95%

Storage: -5% to 95%

Safety Compliance UL Mark (US and Canada)

CE Mark

EN60950

RoHS (European Union)

UTP cable specifications

The NC112T adapter can use existing UTP CAT5 (or better) cable to deliver Gigabit Ethernet over

copper, according to the IEEE 802.3ab specifications. For new installations, CAT5e (enhanced CAT5)

cable is recommended.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Hp NC112T PCI Express Gigabit Server Adapter Manual de usuario Pagina 11