Hp NC370T PCI-X Multifunction Gigabit Server Adapter Manual de usuario descargar pdf (Pagina 19)

Specifications

C-2 HP NC370T PCI-X Multifunction Gigabit Server Adapter User Guide

Table C-1: NC370T PCI-X Multifunction Gigabit Server Adapter specifications

continued

Specification Description

Emissions Classifications Class B

Agency Approvals USA:

Canada:

Japan:

Korea:

Australia:

European Union:

FCC (CFR 47 part 15) and UL 60950

ICES-003 and CSA 60950

VCCI

MIC (RRL), EMC Registration

ACA, AS/NZS3548/EN55022:1998 (CISPR

22), EN55024:1998

EN 55022:1998 (CISPR 22), EN 55024:1998,

and IEC 60950:1999 (EN 60950:2000)

Safety Compliance UL Mark (USA and Canada)

CE Mark

EN 60590

UTP cable specifications

To connect to the network, the NC370T Server Adapter uses the following cable for

1000BASE-T transmission.

• Category 5 UTP or better

• 22-26 AWG, 100Ω @ 1 MHz

• EIA/TIA 568a or EIA/TIA 568b

Using UTP Category 5 cable in Gigabit over copper installations

For Gigabit over copper installations, Category 5 UTP or better 1000BASE-T cable must

comply with the IEEE 802.3ab 1000BASE-T standard. For new installations, Category 5e

(enhanced Category 5) or better cable is recommended.

RJ-45 pinouts and crossover function

The Ethernet standard also specifies that each segment implement a crossover function to

connect the transmitter of one device to the receiver of a device at the other end, and vice-

versa. The crossover function may be implemented internally at the hub or switch, or

externally through the twisted-pair media.

1 2 ... 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Hp NC370T PCI-X Multifunction Gigabit Server Adapter Manual de usuario Pagina 19