Hp e-CommerceXML Accelerator sa7150 Manual de usuario Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 212
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
C H A P T E R 3 Failure Conditions, Fail-safe, and Fail-through
51
Delete a Block
The example below illustrates how to delete a subnet block. Type the
delete block command with the block ID (block ID is 1 in the
example).
1. Use the show block command to identify the block to be deleted.
HP SA7150> show block
-----------
blocks :
-----------
(1) block 10.1.2.1 255.255.255.255 20.1.2.1
255.255.255.255 80 0xffff
-----------
2. Use the delete block command followed by the block ID to
delete the block.
HP SA7150> delete block 1
Failure Conditions, Fail-safe, and Fail-through
During a failure condition unprocessed data can either pass through
the SA7150 or not, depending on whether Fail-safe or Fail-through
mode is enabled. The Fail-through switch is by default in Fail-safe
mode, meaning that during a failure no data packets will pass from
one side of the SA7150 to the other. For details, see Failure/Bypass
Modes in Appendix B.
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 211 212

Comentarios a estos manuales

Sin comentarios