Hp Integrity NonStop J-Series Manual de usuario descargar pdf (Pagina 43)

Operation

M8605A and M8606A ACL Tape Drive Installation and User’s Guide—546012-002

4-13

Inserting and Removing Tape Cartridges

The magazine must be removed from the ACL in order to remove or insert tape

cartridges. Make sure the slot you want to use is not already reserved for a tape

cartridge that is now in a tape drive. The safest way to do this is to unload all tape

drives before removing a magazine. You can unload the tape drive either through your

host system software or by using the Move Media option on the Default Screen.

Removing the Magazine

You must manually remove the ACL magazine. To access the magazine, use the

Magazine Access option on the Default Screen. This option lets you open the left

magazine door. After opening the magazine door, pull the magazine out and away from

the ACL chassis.

Inserting Cartridges into the Magazine

A full magazine is shown in Figure 4-13. The lowest numbered tape cartridge slot is the

one closest to the front of the magazine.

Insert a tape cartridge so that the barcode labels are facing outward.

Note. Handle and store tape cartridges in a clean, dust-free environment.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 79 80

Sin comentarios

Hp Integrity NonStop J-Series Manual de usuario Pagina 43