Hp Netserver L Server series Manual de usuario descargar pdf (Pagina 16)

Chapter 3 Removing and Replacing Covers

bottom front of the chassis. To remove, pull the bezel forward until it unsnaps,

then lift the bezel forward and upward from the chassis face (see Figure 3-1).

Figure 3-1. Removing the HP NetServer LH 4 Bezel

CAUTION The NetServer covers are heavy. Support them as you remove

them, and allow room to move them away from the NetServer

and for storage when removed.

Cover 1

Once you have removed the bezel, remove cover 1 by unscrewing the thumbscrew

and then pulling the cover forward to disengage it. Lift it outward and away from

the chassis (see Figure 3-2).

Cover 2

Remove cover 2 by unscrewing the thumbscrew, pulling the cover forward and

then slightly sideways to disengage it. Lift it up and away from the chassis (see

Figure 3-2).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 125 126

Sin comentarios

Hp Netserver L Server series Manual de usuario Pagina 16