Hp ProLiant BL10e G2 Server Blade Manual de usuario descargar pdf (Pagina 27)

Getting Started

b. Open a terminal emulation session with the following settings: 9600 bps,

8 data bits, no parity, and 1 stop bit.

c. Log into the Integrated Administrator using the password on the settings tag

attached to the interconnect tray.

2. Establish the Integrated Administrator IP address.

For a detailed explanation of the command line conventions used in this

document, see Appendix A, “Command Line Conventions.”

— If a DHCP server is attached to the network, determine the Integrated

Administrator IP address. Enter the following command at the command line

interface:

SHOW NETWORK

— If a DHCP server is not attached to the network, enter the following

commands sequentially to assign a static IP address to the Integrated

Administrator:

SET IPCONFIG STATIC <IP address> <subnet mask>

SET GATEWAY <IP address>

SET DNS <primary address> {<secondary address>}

You can now access the Integrated Administrator using a web browser, Secure

Shell, Telnet, or SNMP.

2-6 HP ProLiant BL e-Class Integrated Administrator User Guide

HP CONFIDENTIAL

Writer: Hilary Stead File Name: c-ch2 Getting Started.doc

Codename: Halo Part Number: 249070-005 Last Saved On: 3/1/04 10:40 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 231 232

Sin comentarios

Hp ProLiant BL10e G2 Server Blade Manual de usuario Pagina 27