Hp ProLiant BL2x220c G5 Server-Blade Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Component identification 11
System maintenance switch
Position Function Default
1 iLO 2 security override Off
2 Configuration lock Off
3 Reserved Off
4 Reserved Off
5 Password disabled Off
6 Reset configuration Off
7 Reserved Off
8 Reserved Off
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
Access components
CAUTION: The jackscrews control the unseating and seating of critical system connectors.
Failure to use the jackscrews to remove and install the server B assembly can cause the system
boards to fail.
Item Description
1 Jackscrew 1
2 Jackscrew 2
3 T-15 Torx wrench
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 91 92

Comentarios a estos manuales

Sin comentarios