Hp ProLiant BL490c G6 Server-Blade Manual de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 100
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
Hardware options installation 37
CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
5. Install the TPM board. Press down on the connector to seat the board ("System board components" on
page 7).
6. Install the TPM security rivet by pressing the rivet firmly into the system board.
7. Install the access panel (on page 13).
8. Install the server blade ("Installing a server blade" on page 17).
9. Power up the server blade (on page 11).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 99 100

Comentarios a estos manuales

Sin comentarios