Hp AD117-9003A-ED3 Manual de usuario descargar pdf (Pagina 164)

Also, this SCSI interface has a non-numeric (XX) slot # indicating that it is on the system

board.

2. From the EFI Shell prompt, enter the following command to obtain the controller handle

for the SCSI interface:

devtree

A tree of all EFI-capable devices installed in the system displays. For example:

Shell> devtree

Device Tree

Ctrl[04]

Ctrl[06] VenHw(SysROM)

Ctrl[0B] Acpi(HWP0002,0)

Ctrl[15] Usb Open Host Controller

Ctrl[16] Usb Open Host Controller

Ctrl[17] Acpi(HWP0002,0)/Pci(1|2)

Ctrl[18] PCI IDE/ATAPI Controller

Ctrl[56] DV-28E-C

Ctrl[91] FAT File System [FAT32] 118 MB

Ctrl[0C] Acpi(HWP0002,100)

Ctrl[1C] LSI Logic Ultra320 SCSI Controller

Ctrl[1D] LSI Logic Ultra320 SCSI Controller

Ctrl[1E] Acpi(HWP0002,100)/Pci(2|0)

Ctrl[57] Acpi(HWP0002,100)/Pci(2|0)/Mac(000E7F7E07FA)

Ctrl[1F] Acpi(HWP0002,100)/Pci(2|1)

Ctrl[58] Acpi(HWP0002,100)/Pci(2|1)/Mac(000E7F7E07FB)

Ctrl[0D] Acpi(HWP0002,200)

Ctrl[20] Acpi(HWP0002,200)/Pci(1|0)

Ctrl[0E] Acpi(HWP0002,300)

Ctrl[22] HP 2 Gb Dual Port PCI/PCI-X Fibre Channel Adapter ( Port 1)

Ctrl[23] HP 2 Gb Dual Port PCI/PCI-X Fibre Channel Adapter ( Port 2)

Ctrl[0F] Acpi(HWP0002,400)

Ctrl[24] Acpi(HWP0002,400)/Pci(1|0)

Ctrl[25] Acpi(HWP0002,400)/Pci(1|1)

Ctrl[10] Acpi(HWP0002,600)

Ctrl[26] Acpi(HWP0002,600)/Pci(1|0)

Ctrl[11] Acpi(HWP0002,700)

Ctrl[27] Acpi(HWP0002,700)/Pci(1|0)

Ctrl[28] Acpi(HWP0002,700)/Pci(1|1)

Ctrl[43] 16550 Serial UART Driver

Ctrl[44] VT-100+ Serial Console

Ctrl[3E] Primary Console Input Device

Ctrl[3F] Primary Console Output Device

Ctrl[3D] Primary Standard Error Device

Ctrl[29] Acpi(HWP0002,700)/Pci(2|0)

Ctrl[40] Acpi(PNP0501,0)

Ctrl[41] 16550 Serial UART Driver

Ctrl[42] VT-100+ Serial Console

Ctrl[54] VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9)

This information describes the SCSI interface because the path on the first line,

Acpi(HWP0002,100), is the path from the information displayed by the info io command.

The next two lines describe the SCSI interface two channels, one line for each channel. The

lines contain the SCSI interface description [LSI Logic Ultra160 SCSI Controller].

The value shown for Ctrl—17 and 18 at the beginning of each line is the controller’s handle

for each channel. You need this value for the next step.

NOTE: The controller handle values change on every boot.

3. From the EFI Shell prompt, enter the following command to obtain the EFI driver’s handle

for the SCSI interface:

Shell> drvcfg

A list of all EFI-capable configurable components in the system is displayed. For example:

Shell> drvcfg

Configurable Components

Drv[3D] Ctrl[15] Lang[eng]

Drv[3F] Ctrl[19] Lang[eng]

164 Utilities

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 176 177

Comentarios a estos manuales

Sin comentarios

Hp AD117-9003A-ED3 Manual de usuario Pagina 164

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Hp AD117-9003A-ED3