Hp DL185 Manual de usuario descargar pdf (Pagina 45)

Contents 45

Figure 24 Removing the backplane

To install the backplane:

1. Orient the backplane so that the three notches on the board align with the three hooks on the

drive cage and press the board down until it clicks into place.

2. Secure the backplane with screws.

Figure 25 Installing the backplane

3. Install all cables including optical drive cables.

The Rear DVD/CDRW Optical Drive PCI cage

To remove the Rear DVD/CDRW Optical Drive PCI cage

：

1. Remove the screw that secures the optical drive carrier to the rear DVD/CDRW optical drive PCI

cage using a T-10 driver. (step 1 in figure 26)

2. Pull the optical drive carrier out of the cage. (step 2 in figure 26)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 102 103

Sin comentarios

Hp DL185 Manual de usuario Pagina 45