Hp TC4100 Manual de usuario descargar pdf (Pagina 48)

Chapter 3 Installing and Configuring

• If the Server is in the rack, perform steps 1-14 from “Removing Covers – Rack-Mount” on page 21.

6. Verify the processor speed and FSB setting, before installing the second processor module.

Both processor modules must have the same clock speed, cache size, FSB speed, and product number.

7. Remove the terminator from the secondary processor socket by lifting up the lever and pulling the

terminator upwards.

Figure 3-17. Remove Terminator Board

NOTE It is not necessary to remove the system board from the Server to install the new

processor module.

NOTE When installing a second processor, the processor speed is set automatically. No manual

setting of switches is necessary.

NOTE The System board is shown removed from the HP Server tc4100 for simplicity in the

following figures, but it is not necessary to remove the system board to install the new

processor module.

NOTE Save the terminator in the CPU protective bag for future needs.

Lift Up

Lever

erm

nator

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 129 130

Sin comentarios

Hp TC4100 Manual de usuario Pagina 48