Hp TX1000 Manual de usuario Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 131
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
3. Remove the fan/heat sink assembly (3).
NOTE: Due to the adhesive quality of the thermal paste and thermal pads located between
the fan/heat sink assembly and system board components, it may be necessary to move the
fan/heat sink assembly from side to side to detach the assembly.
NOTE: The thermal paste and thermal pads should be thoroughly cleaned from the surfaces of
the fan/heat sink assembly (1) and the system board components (2) each time the fan/heat sink
assembly is removed. Thermal paste and thermal pads are included with all system board, fan/
heat sink assembly, and processor spare part kits.
Reverse this procedure to install the fan/heat sink assembly.
ENWW Component replacement procedures 73
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 130 131

Comentarios a estos manuales

Sin comentarios