Hp COMPAQ DX2718 MT Manual de usuario descargar pdf (Pagina 54)

6–18 483941-001 Service Reference Guide

Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis

6.8.2 Removing a Drive

1. Turn off the computer properly through the operating system and turn off any external

devices. Disconnect the power cord from the power outlet and disconnect any external

devices.

2. Remove the access panel and front bezel.

3. Disconnect the power and data cables from the back of the drive, as indicated in the

following illustrations.

4. Remove all the screws that secures the drives in the drive bay. Slide the drive disk forward

and out of the bay.

Removing the Drives

Drive Positions

Item Description

1 First 5.25-inch, half-height bays for optional drives

Second 5.25-inch, half-height bays for optional drives

2 One standard 3.5-inch, one-third height bays (1.44-MB diskette drive shown)

3 One internal 3.5-inch, one-third height bays for hard drives

An internal 3.5-inch bracket kit for second hard drives is available as option.

* These apply for selected models and countries only.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 106 107

Sin comentarios

Hp COMPAQ DX2718 MT Manual de usuario Pagina 54