Hp LXR 8000 Manual de usuario Pagina 95

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 95
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 94
39
Set the HP Model 30/FC High Availability Disk Array Operating
Mode
The disk array is shipped from the factory with auto-trespass, which is one of the host mode parameters, turned on.
Auto-trespass must be turned off for the disk array to operate correctly on the Microsoft Windows NT operating system.
1. Turn off Auto-Trespass
a. Make sure that ArrayGUIde has been installed onto the HP NetServers.
b. From the
Start bar, select Programs.
b. Click
Windows NT Explorer.
c. Double-click
Program Files.
d. Double-click
CLARiiON.
e. Double-click
Agent.
f. Double-click the program file SetHM_a.exe.
g. Using this program to change the host mode parameters causes all disk arrays attached to the HP NetServers to
reboot automatically.
To part 6 of the HP NetServer Installation Guide.
Vista de pagina 94
1 2 ... 90 91 92 93 94 95

Comentarios a estos manuales

Sin comentarios