Hp PAVILION DX6500 Manual de usuario descargar pdf (Pagina 83)

3. Loosen the three Phillips PM2.5×5.0 screws (2) and the Phillips PM2.5×4.0 screw (3) that secure

the fan/heat sink assembly to the system board.

4. Remove the fan/heat sink assembly (4).

NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink

assembly and system board components, it may be necessary to move the fan/heat sink assembly

from side to side to detach the assembly.

NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink

assembly (1) and (2), the Northbridge chip (3), and the processor (4) each time the fan/heat sink

assembly is removed. Thermal material must be installed on all surfaces before the fan/heat sink

assembly is reinstalled. Replacement thermal material is included with all fan/heat sink assembly,

system board, and processor spare part kits.

If it is necessary to replace the processor bracket, turn the system board upside down, with the

expansion port 3 and external monitor port toward you.

Component replacement procedures 75

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 141 142

Sin comentarios

Hp PAVILION DX6500 Manual de usuario Pagina 83