Hp LTO 4 SAS Manual de usuario descargar pdf (Pagina 23)

HP LTO Ultrium 4 drives technical reference manual, volume 5: UNIX, Linux and OpenVMS configuration guide 21

4 HP (Tru64 5.1x) servers and workstations

NOTE: Only SCSI drives are supported on Alpha Server systems.

Determining attached devices

After connecting the tape drive to your system, boot TRU64 and check for the presence of the new

tape device. Execute the following commands

# hwmgr -scan scsi

hwmgr: Scan request successfully initiated

# hwmgr -v d

HWID: Device Name Mfg Model Location

--------------------------------------------------------------------

4: /dev/dmapi/dmapi

5: /dev/scp_scsi

6: /dev/kevm

149: /dev/disk/dsk0c COMPAQ BD03685A24 bus-2-targ-0-lun-0

150: /dev/disk/dsk1c COMPAQ BD03664553 bus-2-targ-1-lun-0

151: /dev/disk/cdrom0c TEAC CD-W216E bus-3-targ-0-lun-0

152: /dev/random

153: /dev/urandom

237: /dev/ntape/tape0 HP Ultrium 4-SCSI bus-1-targ-3-lun-0

What next?

Once device files have been created, you should confirm that your new tape drive is working

properly. Please consult your Tru64 operating system documentation and Chapter 8 on page 37 for

instructions on testing your installation.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Sin comentarios

Hp LTO 4 SAS Manual de usuario Pagina 23