HP Compaq 8100 Elite Series Guía de usuario descargar pdf (Pagina 23)

b. If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end,

and carefully rock it back and forth until the connectors pull free from the socket. Pull the

expansion card straight up from the socket (1) then away from the inside of the chassis to

release it from the chassis frame (2). Be sure not to scrape the card against the other

components.

NOTE: Before removing an installed expansion card, disconnect any cables that may be

attached to the expansion card.

NOTE: Your computer may look different than the illustration shown below.

Figure 13 Removing a Standard PCI Expansion Card

ENWW Removing or Installing an Expansion Card 17

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Sin comentarios

HP Compaq 8100 Elite Series Guía de usuario Pagina 23