HP 165st Guía de usuario descargar pdf (Pagina 23)

2-7

Upgrading Drives and Capacity in 5.2-Gb Drive Jukeboxes

Upgrading Drives (C1154J/K/L, C1158J/K/L Kits)

4. Mount the cable clip on the rear of both drives as shown in #4 of Figure 2-4.

5. Slide the bottom drive into the enclosure far enough to connect a set of drive

cables to the drive as shown in #1, #2, and #3 on Figure 2-4.

As you connect the drive interface cable, slide the cable into the cable clip on the

rear of the drive.

6. Slide the top drive into the enclosure far enough to connect a set of drive cables

to the drive as shown in #1, #2, and #3 on Figure 2-4.

As you connect the drive interface cable, slide the cable into the cable clip on the

rear of the drive.

7. Insert the T-10 screws to mount the drives (see screws labeled #3 and #4 on

Figure 2-5).

Each drive uses four screws; two on each side.

Figure 2-5 Mounting the Drives Into the Drive Enclosure

8. Remount the top and bottom covers on the enclosure (see #1 and #2 on Figure

2-5)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 85 86

Sin comentarios

HP 165st Guía de usuario Pagina 23