HP Classmate Notebook PC Manual de usuario descargar pdf (Pagina 43)

Hard drive

Description Spare part number

320-GB, 5400-rpm, 7 mm hard drive 786030-001

Hard Drive Hardware Kit (includes hard drive bracket, rubber rails, sponge, and screws) 764408-001

Hard drive connector cable 764409-001

Before removing the hard drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

4. Remove the bottom cover (see

Bottom cover on page 22).

5. Disconnect the battery cable from the system board.

To remove a hard drive:

1. Remove the 4 Phillips PM2.0×3.0 screws (1) that secure the hard drive to the chassis.

2. Remove the Mylar tape from atop the system board connector (2).

3. Disconnect the cable from the system board connector (3).

Component replacement procedures 37

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 74 75

Sin comentarios

HP Classmate Notebook PC Manual de usuario Pagina 43