Hp Compaq 435 Notebook PC Manual de usuario descargar pdf (Pagina 70)

Managing a power-on password

To set, change, or delete this password, follow these steps:

1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key for

Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the

Startup Menu is displayed, press f10.

2. Use the arrow keys to select Security > Set Power-On Password, and then press enter.

●

To set a power-on password, type your password in the Enter New Password and

Confirm New Password fields, and then press enter.

●

To change a power-on password, type your current password in the Enter Current

Password field, type a new password in the Enter New Password and Confirm New

Password fields, and then press enter.

●

To delete a power-on password, type your current password in the Enter Current

Password field, and then press enter 4 times.

3. To save your changes and exit Setup Utility, use the arrow keys to select Exit > Exit Saving

Changes.

Your changes take effect when the computer restarts.

Entering a power-on password

At the Enter Password prompt, type your password, and then press enter. After 3 unsuccessful

attempts to enter the password, you must restart the computer and try again.

60 Chapter 10 Security

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 91 92

Sin comentarios

Hp Compaq 435 Notebook PC Manual de usuario Pagina 70