HP OmniBook 600CT Manual de usuario descargar pdf (Pagina 29)

Installing memory

The OmniBook 600 family has one location for expanding system RAM. The memory location is on the front

surface of the OmniBook 600. The RAM door is remove by pushing down. To remove RAM already

installed, rotate the pull tab out from under the RAM module and pull the module out.

To install a RAM module, use the reverse procedure. Make sure that the pull tab is on the bottom.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

Sin comentarios

HP OmniBook 600CT Manual de usuario Pagina 29