HP EliteDisplay S240ml 23.8-in IPS LED Backlit MHL Monitor Manual de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 35
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
2. Depending on your configuration, connect either the DisplayPort, HDMI, or VGA video cable
between the source device and the monitor.
NOTE: The video mode is determined by the video cable used. The monitor will automatically
determine which inputs have valid video signals. The inputs can be selected by pressing the
Input button on the side panel or through the On-Screen Display (OSD) feature by pressing the
Menu button.
For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort
connector on the rear of the monitor and the other end to the DisplayPort connector on your
input device (cable provided).
For HDMI digital operation, connect the HDMI signal cable to the HDMI connector on the
rear of the monitor and the other end to the HDMI connector on your input device (cable
provided).
8 Chapter 2 Setting up and using the monitor
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Comentarios a estos manuales

Sin comentarios