HP 6631B Manual de usuario Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 75
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
69
D
Line Voltage Conversion
WARNING: Shock Hazard Operating personnel must not remove instrument covers.
Component replacement and internal adjustments must be made only by
qualified service personnel.
Open the Unit
Turn off ac power and disconnect the power cord from the unit.
Remove the four screws that secure the cover (use a #2 Pozi drive).
Slightly spread the bottom of the cover and pull it back to remove it from the unit.
Configure the Power Transformer
Locate the ac input wiring harness on the left side of the transformer.
Use a needlenose pliers and connect the ac input wiring harness according to the information in
the following figure:
grey
white/red/grey
jumper
grey
white/red/grey
jumper
grey
white/red/grey
jumper
grey
white/red/grey
jumper
spare
Figure D-1, Power Transformer AC Input Connections
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 75

Comentarios a estos manuales

Sin comentarios