Hp Compaq S1922 18.5-inch Widescreen LCD Monitor Manual de usuario descargar pdf (Pagina 11)

ENWW Installing the Monitor 5

3. Press the base into the column until it locks in position.

Figure 3-2 Attaching the Base

4. Lift the monitor to an upright position and place on a flat, stable surface.

Figure 3-3 Monitor in upright position

Preparing the monitor for wall-mounting

1. Check the stability of the wall-mounting fixture.

WARNING! To reduce the risk of personal injury or of damage to the equipment,

check that the wall-mounting fixture is adequately installed and secured before

attaching the monitor. Refer to the instructions supplied with the wall-mounting fixture

and check that it is capable of supporting the monitor.

2. Disconnect the power cable and any other cables from the monitor.

3. Place the monitor face down on a flat, protected surface.

4. Adjust the stand to a proper angle and remove the screw hidden in the column

cover that fasten the base to the monitor.

Figure 3-4 Location of screw securing base to monitor

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Sin comentarios

Hp Compaq S1922 18.5-inch Widescreen LCD Monitor Manual de usuario Pagina 11