HP 72SR Manual de usuario descargar pdf (Pagina 116)

4-10 Manual Calibrations

◆ 10-inch calibration — prints a 10-inch test pattern so you

can verify its length with an accurate metal ruler. This is

not as precise as the 34-inch calibration, but it uses less

media. Measure and adjust the media advance as

needed until the pattern is exactly 10 inches long.

Tip

To avoid cutting the 10-inch pattern from the media

web, copy the marks from the 10-inch calibration to

the long edge of a letter-size (or A4) sheet of paper.

Then measure the transferred marks and adjust the

media advance as needed until the marks are exactly

10 inches apart.

Tip

Run the 34-inch or 10-inch calibration first, then run

the stitch pattern version to fine-tune the media

advance accuracy.

◆ Input MFN — enter the Media Feed Number that was

displayed after a previous media feed calibration, to

return to that setting without performing the calibration

again.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 213 214

Sin comentarios

HP 72SR Manual de usuario Pagina 116