HP AWSXCIG-1A Manual de usuario descargar pdf (Pagina 20)

NOTE: The OA automatically creates user accounts for itself (prefixed with the letters OA)

to provide single sign-on capabilities. Do not remove these accounts. The OA also creates

iLO accounts on each blade for its own use.

3.2.4 Enabling Telnet Access

1. Under the hardware model, click iLO.

2. In the body of the main window, click Web Administration to open the iLO2 utility in a

new window.

NOTE: Turn off popup blocking so the window can open.

3. In the new window, click Administration.

4. In the left frame, click Access.

5. Click the control to enable Telnet Access.

6. Click Apply to save the settings.

3.2.5 Setting the Power Regulator

Select an individual blade. Click the Power Management tab and make the following settings:

1. For every node except the head node, select No to Automatically Power On Server because

you do not want to automatically turn on power to the node.

2. Click Submit.

3. In the left frame, click Settings.

4. Select Enable HP Static High Performance Mode.

5. Click Apply to save the settings.

6. For the head node, continue to Section 4.4. For compute nodes, return to Section 3.2.3 and

repeat Section 3.2.3, Section 3.2.4, and Section 3.2.5 for each compute node.

3.2.6 Configuring Smart Array

This section is for configurations containing SB40 storage blades.

Configure disks into the smart array from the remote graphics console. You must add the disk

or disks to the smart array before attempting to image the node.

To set up the smart array device, click Remote Console on the virtual console page of the iLO2

Web Administrator Utility, then follow these steps:

1. Click Integrated Remote Console to open a remote console window which provides access

to the graphics console virtual media and power functions.

2. In the remote console window, click Power.

3. Click Momentary Press.

4. Wait a few seconds for the power on phase to begin. Click the MB1 mouse button in the

remote console window to put the pointer focus in this window so that your keyboard

strokes are recognized.

5. Watch the screen carefully during the power-on self-test phase, and press the F8 key when

you are prompted to configure the disks into the smart array. Select View Logical Drives

to determine if a logical drive exists. If a logical drive is not present, create one.

If you create a logical drive, exit the Smart Array utility and power off the node. Do not let

it try to boot up.

For more information about specific smart array configurations, see the documentation that

came with your HP ProLiant server .

20 Hardware Setup

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Comentarios a estos manuales

Sin comentarios

HP AWSXCIG-1A Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Los conmutadores de red HP AWSXCIG-1A