HP 620n Guía de usuario descargar pdf (Pagina 196)

ENWW Troubleshooting the HP Jetdirect Print Server 196

Troubleshooting Wireless Print

Servers

Unable to Communicate During Initial Setup

If you are using wireless communications to set up the print server,

verify the following:

● Your wireless computer is configured to match the default

wireless network settings on the HP Jetdirect print server:

■ Communication Mode: Ad Hoc

■ Network Name (SSID): hpsetup

■ Encryption (WEP): <Disabled>

Note The Network Name (SSID) is case-sensitive. Be

sure to specify “hpsetup” using lowercase

characters.

● The HP Jetdirect print server is turned on and operating properly

(print a Jetdirect configuration page).

● You are within range of the HP Jetdirect print server.

● There are fewer than six devices total on the Ad Hoc network

(with SSID “hpsetup”).

● There is no Access Point in the vicinity that is configured with

an SSID of “hpsetup”.

● Multiple print servers are not being configured at the same time.

If there are multiple print servers, turn all off except the one you

want to configure.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 263 264

Sin comentarios

HP 620n Guía de usuario Pagina 196