HP MSM7XX Manual de usuario descargar pdf (Pagina 147)

CLI commands

RADIUS context

Path: View > Enable > Config > RADIUS

This context provides commands for configuring RADIUS profiles.

end

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

end

Switches to parent context.

radius-server accounting port

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

radius-server accounting port <number>

Specifies the port to use for RADIUS accounting.

Parameters

<number> Accounting port number. Range: 1 - 65535.

radius-server alternate hosts

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

radius-server alternate hosts

Try last answering RADIUS host first.

no radius-server alternate hosts

Try primary RADIUS host first.

radius-server authentication method

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

radius-server authentication method (mschap | chap | mschapv2 | pap | eap-md5)

Sets the authentication method to use when communicating with the RADIUS server.

For 802.1x users, the authentication method is always determined by the 802.1x client software

and is not controlled by this setting.

If traffic between the service controller and the RADIUS server is not protected by a VPN, it is

recommended that you use either EAP-MD5 or MSCHAP V2, if supported by your RADIUS Server.

(PAP, MSCHAP V1 and CHAP are less secure protocols.)

radius-server authentication port

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

radius-server authentication port <number>

Specifies the port to use for RADIUS authentication. By default, RADIUS servers use port 1812.

Parameters

<number> Authentication port number. Range: 1 - 65535

2-107

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 205 206

Sin comentarios

HP MSM7XX Manual de usuario Pagina 147