HP Moonshot-45XGc Guía de usuario descargar pdf (Pagina 12)

display packet-filter

Use display packet-filter to display whether an ACL has been successfully applied to an interface for

packet filtering.

Syntax

display packet-filter { interface [ interface-type interface-number ] [ inbound | outbound ] | interface

vlan-interface vlan-interface-number [ inbound | outbound ] [ slot slot-number ] }

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface [ interface-type interface-number ]: Specifies an interface by its type and number. VLAN

interfaces are not supported. If you do not specify an interface, this command displays ACL application

information on all interfaces except VLAN interfaces for packet filtering.

interface vlan-interface vlan-interface-number: Specifies a VLAN interface by its number.

inbound: Specifies the inbound direction.

outbound: Specifies the outbound direction.

slot slot-number: Specifies an IRF member device. The slot-number argument represents the ID of the IRF

member device. If you do not specify an IRF member device, this command displays ACL application

information for packet filtering on the master.

Usage guidelines

If neither the inbound keyword nor the outbound keyword is specified, this command displays the ACL

application information for both incoming and outgoing packet filtering.

Examples

# Display ACL application information for incoming packet filtering on interface FortyGigE

1/1/1.

<Sysname> display packet-filter interface fortygige 1/1/1 inbound

Interface: FortyGigE1/1/1

In-bound policy:

ACL 2001, Hardware-count

ACL6 2002

IPv4 default action: Deny

IPv6 default action: Deny

Table 2 Command output

Field Descri

tion

Interface Interface to which the ACL applies.

In-bound policy ACL used for filtering incoming traffic.

Out-bound policy ACL used for filtering outgoing traffic.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 123 124

Sin comentarios

HP Moonshot-45XGc Guía de usuario Pagina 12