HP sa2250 Guía de inicio rápido descargar pdf (Pagina 17)

Chapter 3 Configuring the Cache Appliance

Upon successful completion of the initial configuration, the appliance will start

and configure the Traffic Server software to run with the network settings just

entered.

NOTE After the initial configurations are saved, the network

parameters will be saved as a static configuration on the

appliance. This is true even if the appliance received the initial

IP configuration via bootp or DHCP. DHCP and bootp will be

disabled on the appliance after the initial network configuration

is complete.

Supplemental Configuration

Once you have completed the initial configuration, the HP Cache Server

Appliance will be operating with default settings as a proxy cache server. Clients

may configure their browsers to use the appliance as their proxy server at this

point with the default proxy port of 8080; however, you may wish to make further

configuration and customization changes.

Configuring the Traffic Server caching application can best be accomplished as

described in the HP Cache Server Appliance Administrator Guide by directing a

browser to: http://<appliance_IP_address>:8081

where 8081 is the default port for

administration using Traffic Manager.

To access any of the system-level functionality listed below, telnet to the appliance

using the telnet access user name and password that was entered during initial

configuration (see “Configuring Initial Network Parameters for LAN A” for

details).

The following activities may be performed through the Configuration menu:

• Change network configuration for the network adapters

• Change the hostname of the appliance

• Set date, time, and time zone

• Change the console port user name and password

• Shutdown and restart

• Restore factory defaults

• Obtain shell access to run commands required to manage Traffic Server

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Sin comentarios

HP sa2250 Guía de inicio rápido Pagina 17