HP Autodesk Lustrexw8400 Guia de preparacion descargar pdf (Pagina 41)

5 Set a static IP and Subnet mask address for the port. Select values that do

not conflict with any other machine on your network. Consider using

the following values:

■ IP address: 192.168.125.10

■ Subnet mask: 255.255.255.0

6 Click OK twice.

To configure the Autodesk control surface on Linux-based workstations:

➤ On the Lustre workstation, use a text editor such as nedit to configure the

network port connected to the control surface with an unrelated static

IP address that does not interfere with any of the IP addresses on the

network. Also assign an appropriate subnet mask. Type:

nedit

/etc/sysconfig/network-scripts/ifcfg-eth<port#>

Modify the IPADDR and NETMASK values. For example:

IPADDR=192.168.125.10

NETMASK=255.255.255.0

Assigning an IP Address to the Autodesk Control Surface | 37

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

Sin comentarios

HP Autodesk Lustrexw8400 Guia de preparacion Pagina 41