1 Modes listed are supported with a single active display. The supported mode list for multiple active displays is a subset of
this list. Not all modes will support video playback and some supported modes may use software MC (motion compensation)
rather than hardware MC. Not all modes will support 3D acceleration depending on the system configuration (e.g., resolution
selected, size of frame buffer, number of installed memory modules, etc.).
NOTE: Other resolutions and refresh rates may be selectable but are not recommended.
DVI ADD2 Graphics Models
DY674A Intel DVI ADD2 adapter for Convertible Minitower and Small
Form Factor
Form Factor
Low-profile card
DVI-D Connector
Compliant with DDWG (Digital Display Working Group) and VESA
specifications for a single-link digital DVI (DVI-D) connector.
Dual Head Support
Yes, when used with the integrated VGA connector
Display Devices
Supported
HP L1530
HP L1740
HP L1755
HP L1940
HP L1955
HP L2035
HP L2335
NOTE: The DVI ADD2 card offers optimal performance with any display that meets applicable
VESA standards.
Color Depth
All modes support 8-bpp, 16-bpp, and 24-bpp color depths (up to 16.7
million colors)
Host Interface
Connector
Mechanically compliant with PCI-E standard
Complies with the Intel ADD2 and Intel Serial Digital Video Output
(SDVO) specifications
Dot Clock
165 MHz maximum
Display Modes
Supports display modes that require up to 165-MHz bandwidth on the
link, as shown in the following table.
Resolution 60-Hz LCD 60-Hz 75-Hz 85-Hz
Blanking 5% reduced GTF GTF GTF
640 x 480 VGA Yes Yes Yes Yes
800 x 600 SVGA Yes Yes Yes Yes
1024 x 768 XGA Yes Yes Yes Yes
1280 x 1024 SXGA Yes Yes No No
1600 x 1200 UXGA Yes Yes No No
ATI RADEON X300 SE
PCI Express (PCIe x16)
Graphics
Models
ATI RADEON X300 SE PCI Express 128-MB DDR single head DVI with
TV out
Bus Type
PCI Express (x16 lanes)
Maximum Vertical
Refresh Rate
85 Hz
Display Support
Integrated 400MHz RAMDAC
Display Max Resolution
2048 x 1536
Board Display Options
128 MB Card Display Option
DVI-I + TV
DVI-I supports analog CRT or flat panel or digital flat panel (using DVI-
A, DVI-D or DVI-I connector)
DVI-I supports analog CRT or flat panel (with VGA connector and DVI-I
to VGA dongle)
TV Connector is a 7-pin mini-DIN (also allowing 4-pin S-Video without
adaptor)
Board Configuration
128 MB Frame Buffer
Specification Description
file:////Webh02/computinghardware/DocDiv/PcStandard/HP/dc7600/HPdc7600- QuickSpecs.htm (22 of 47)26/09/2006 15:06:41
Comentarios a estos manuales