HP gt7720 Guía de usuario Pagina 1

Hardware Reference GuideHP gt7720/gt7725 Thin Client

(1) Cable lock slot(2) Secure USB compartmentFigure 1-3 Top components, internal view(1) Cable lock slot(2) Secure USB compartment ports (2)Rear Pane

(3) Universal serial bus (USB) connectors (4) (7) Serial connector(4) PS/2 connectors (2) (8) Power connectorQuad-head ConfigurationNOTE: This applies

3. Align the feet with their holes and press them in securely.Figure 1-6 Installing the rubber feetInstalling the StandTo install the stand:1. Turn u

2. Press the tab (1), and then slide the stand about 1.26 cm (1/2 inch) toward the front of the unit andlift the stand off the unit (2).Figure 1-8 Re

Using the KeyboardFigure 1-9 Keyboard features(1) Caps Lock key Activates/deactivates the Caps Lock feature.(2) Scroll Lock key Activates/deactivates

Windows Logo KeyUse the Windows Logo Key in combination with other keys to perform certain functions available inWindows operating systems.Windows Log

Serial Number LocationEvery thin client includes a unique serial number located as shown in the following illustration. Have thisnumber available when

2 Hardware ChangesGeneral Hardware Installation SequenceTo ensure the proper installation thin client hardware components:1. Back up any data, if nece

●Installing the PCI-Express Card on page 20●External Drives on page 21NOTE: Option kits include more detailed installation instructions.7. Replace the

3. Remove the cover from the unit by first lifting the rear (screw side) of the cover, and then lifting thecover off the unit (3).Figure 2-1 Removing

© Copyright 2008–2009 Hewlett-PackardDevelopment Company, L.P. Theinformation contained herein is subject tochange without notice.Microsoft and Window

3. Replace the screw (3).Figure 2-2 Replacing the secure compartment cover14 Chapter 2 Hardware Changes ENWW

Removing and Replacing the Side Access Panel,Expansion Module, and Metal Side CoverRemoving the Side Access Panel, Expansion Module, and Metal SideCov

2. Lift the module up and away from the chassis (2).Figure 2-4 Removing the expansion moduleTo remove the metal side cover:1. Remove the four screws

To replace the metal side cover:1. Place the metal side cover on the chassis, front side first, making sure to align the screw holes inthe cover with

To replace the access panel:1. Place the access panel on the side of the unit, offset about 6.35 mm (1/4 inch) toward the rear ofthe unit (1).2. Slide

Installing the USB DeviceBefore beginning the replacement process, review General Hardware Installation Sequenceon page 11 for procedures you should f

2. To release the battery from its holder, squeeze the metal clamp that extends above one edge ofthe battery. When the battery pops up, lift it out (1

You need the following to complete this procedure:●PCI-Express card●Phillips head screwdriverWARNING! Before removing the side access panel, ensure th

A SpecificationsTable A-1 HP gt7720/gt7725 Thin ClientDimensionsWidth (front to back)Height (without stand)Height (with stand)Depth46 mm254.5 mm215.1

Power SupplyOperating Voltage RangeRated Line Frequency100–240 VAC50–60 Hz100–240 VAC50–60 HzPower Output (maximum) 120 W 120 WRated Output Current (m

About This BookWARNING! Text set off in this manner indicates that failure to follow directions could result in bodilyharm or loss of life.CAUTION: Te

B Security ProvisionsSecuring the Thin ClientThese thin clients are designed to accept a security cable lock. This cable lock prevents unauthorizedrem

C Mounting the Thin ClientHP Quick ReleaseThis thin client incorporates four mounting points on each side of the unit. These mounting points followthe

To use the HP Quick Release with a VESA-configured thin client:1. Using four 10 mm screws included in the mounting device kit, attach one side of the

3. Slide the side of the mounting device attached to the thin client (1) over the other side of themounting device (2) on the device on which you want

●You can mount the thin client on the back of a flat panel monitor stand.Figure C-6 Thin client mounted on back of monitor stand●You can mount the th

●You can mount the thin client under a desk.Figure C-8 Thin client mounted under deskNon-supported Mounting OptionCAUTION: Mounting a thin client in

D Thin Client OperationRoutine Thin Client CareUse the following information to properly care for your thin client:●Never operate the thin client with

●You can lay the thin client horizontally on its rubber feet.Figure D-2 Horizontal orientation●You can lay the thin client under a monitor stand with

Non-supported OrientationHP does not support the following orientation for the thin client.CAUTION: Non-supported placement of thin clients could resu

E Electrostatic DischargeA discharge of static electricity from a finger or other conductor may damage system boards or otherstatic-sensitive devices.

iv About This Book ENWW

F Shipping InformationShipping PreparationFollow these suggestions when preparing to ship the thin client:1. Turn off the thin client and external dev

IndexAaccess panelremoving 15replacing 16altitude specifications 22Bbattery, replacing 11Ccable lock slot location 3cable lock, installing 24cable rou

orientationhorizontal 5vertical 6Pparallel connector 4power button location 3power connector location 4power LED location 3power output specifications

Table of contents1 Product FeaturesStandard Features ...

Appendix B Security ProvisionsSecuring the Thin Client ...

1 Product FeaturesStandard FeaturesThank you for purchasing an HP thin client. We hope you have years of use from our thin clients. Ourgoal is to prov

Thin Client Management SolutionsHP has a comprehensive suite of management solutions to fit your needs. This allows you to choosesolutions that will w

Front Panel ComponentsFigure 1-1 Front panel components(1) Secure USB compartment (5) Power LED(2) Power button (6) Line-out (headphone) audio connec