HP ProLiant BL25p Especificaciones descargar pdf (Pagina 15)

Removal and replacement procedures 15

Open the processor cage latch.

4. Open the processor cage.

5. Remove the heatsink.

6. Open the processor locking lever.

7. Remove the processor.

CAUTION: The heatsink is not reusable and must be discarded if removed from the processor after

application.

CAUTION: Always install a processor or a processor blank and 1P enabler board in processor socket 2. If

processor socket 2 is empty, the server blade will not boot.

To install the component:

1. Install the processor.

CAUTION: Be sure that the processor socket locking lever is open before installing the processor into the

socket.

CAUTION: The processor is designed to fit one way into the socket. Use the alignment guides on the

processor and socket to properly align the processor with the socket. Refer to the server blade hood label for

specific instructions.

2. Close the processor locking lever.

CAUTION: Be sure that the processor socket locking lever is closed after the processor is installed. The

lever should close without resistance. Forcing the lever closed can damage the processor and socket,

requiring system board replacement.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Sin comentarios

HP ProLiant BL25p Especificaciones Pagina 15