HP QX285USABA Manual de usuario descargar pdf (Pagina 102)

Removing the Front Bezel

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB flash drives, from the computer.

3. Turn off the computer properly through the operating system, then turn off any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board

as long as the system is plugged into an active AC outlet. You must disconnect the power cord

to avoid damage to the internal components of the computer.

5. If the computer is on a stand, remove the computer from the stand and lay the computer down.

6. Remove the computer access panel.

7. Lift up the three tabs on the side of the bezel (1), then rotate the bezel off the chassis (2).

Figure 4-3 Removing the Front Bezel

94 Chapter 4 Small Form Factor (SFF) Hardware Upgrades ENWW

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 180 181

Sin comentarios

HP QX285USABA Manual de usuario Pagina 102