HP T100 Especificaciones descargar pdf (Pagina 7)

DESCRIPTION:

The HPT 100F is a flow-through style transmitter

while the HPT 100S is a single-ended or deadleg

style. Each style is available with a variety of tube

stub and face seal connections. Electrical connection

is via either a Bendix® compatible 4 pin connector or

a flying lead pigtail. The small size and light weight

of the HPT 100 eliminates the need for bulky

mounting hardware and mechanical supports.

FUNCTIONAL SPECIFICATIONS:

SERVICE: Liquid, gas or vapor

AVAILABLE RANGES: vac to 100 psig, vac to 250 psig, vac to 1000 psig,

vac to 2000 psig, vac to 3000 psig. Alternate ranges, including

Bar and lower ranges, are available.

OUTPUT: 4-20 mA, 2 wire, current limited with

reverse polarity protection or

0-5 Vdc (Calibrated 0.1- 5.1 Vdc)

POWER SUPPLY: 12 to 30 Vdc

LOOP RESISTANCE (4 - 20 mA.): 900 ohms at 30 Vdc; 0 ohms at 12 Vdc

OUTPUT LOAD (0 - 5 Vdc): > 50K ohms

SPAN/ZERO ADJUSTMENT: +/- 5% of span minimum

TEMPERATURE LIMITS:

COMPENSATED: 0

C to 50

OPERATING: -25

C to 85

STORAGE: -40

C to 85

HUMIDITY: 0-95% RH (pigtail cable) *

0-95% RH (Bendix

® type >=500 psig)

0-80% RH (Bendix

® type <500 psig)

OVERRANGE: 150% of Full Scale

BURST PRESSURE: 400% of Full Scale

HAZARDOUS LOCATIONS:

INTRINSICALLY SAFE: Class I, Division 1, Groups A, B, C & D, NEMA 4X (IP56)

Approved Barrier Required

DIVISION 2: Class I, Division 2, Groups A, B, C & D, NEMA 4X

Protective Enclosure or Conduit Connection Required

Note: NEMA 4X/IP56 applies to pigtail terminations version only

*(vent through cable to dry environment)

DIELECTRIC ISOLATION: 100V DC

pg. 1-2

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comentarios a estos manuales

Sin comentarios

HP T100 Especificaciones Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Barebones Pc / Estación De Trabajo HP T100