HP xw8000 Manual de usuario descargar pdf

Page 1 of 1

Avid

Adrenaline

™

and Avid Mojo

™

Configuration Guidelines

for the HP xw8000 Workstation

The following describes the configuration requirements for Avid Adrenaline and Avid Mojo on

the HP xw8000 Workstation:

• HP

™

xw8000 Workstation, 2.8 GHz Intel

Xeon

™

. Dual processor required for Avid

Adrenaline.

• NVIDIA

Quadro

4 980 XGL graphics card

• 40GB or larger IDE Boot Drive

• 1GB memory minimum

• ATTO 3300 and 3305 Fibre Channel host adapters

• Alacritech

Gb Ethernet card if desired for LANshare EX

• SCSI – The two integrated SCSI channels on the HP xw8000 workstation are supported.

They are from the Ultra 320 SCSI controller on the system board. The HP xw8000

external SCSI expansion kit (Avid P/N 0010-06332-01 or HP P/N AA857A) must be

installed to obtain access to these two channels at the rear of the system.

• FireWire – either one of the two integrated FireWire connections on the HP xw8000

system or a FireWire PCI board can be used for connecting the Avid Adrenaline or Avid

Mojo to the system. However, specific configuration rules must be followed.

Avid has qualified the integrated FireWire ports in the HP xw8000 for connection to

Avid Adrenaline or Avid Mojo. However, if it is desired to use the integrated Gbit

Ethernet for connection to Avid Unity



LANshare EX, then a 1394 add-in card must be

installed into a PCI-X slot for connection to the Avid Adrenaline or Avid Mojo (see slot

configurations for the HP xw8000 Workstation, below). To support this, Avid has

qualified the ADS PYRO PCI 64 (PYRO part number API-311) and the SIIG 1394 3-Port

PCI i/e, part #NN-440012 PCI FireWire cards for use with the HP xw8000 workstation.

Only universal PCI cards (can use 3.3v) may be installed in PCI-X slots.

Slot Configurations for the HP xw8000 Workstation

The HP xw8000 workstation has three separate PCI bus segments. This allows for placement of

PCI boards into specific PCI bus segments in the interest of optimizing bus utilization and

performance. However, integrated devices such as the FireWire, Gb Ethernet, and SCSI

controllers are also connected to particular PCI segments and can affect the bandwidth available

to add-in cards in those segments.

The following illustration, table, and information following the table provides an explanation of

what each PCI segment is, which PCI slots are contained in each PCI segment, and how the

segments are affected by the other connections on the system.

1 2 3

Indice de contenidos

Pagina 1 - Configuration Guidelines

Page 1 of 1 Avid® Adrenaline™ and Avid Mojo™ Configuration Guidelines for the HP xw8000 Workstation The following describes the configuration requirem

Pagina 2 - PCI Segments

Page 2 of 2 HP xw8000 Slots PCI Segments The following PCI Segment table defines which PCI slots and system connections are assigned to each PCI bus

Pagina 3

Page 3 of 3 Avid recommends the following slot locations for specific PCI cards in the HP xw8000 workstation: Slot 1 - This slot is not recommended f

Comentarios a estos manuales

Sin comentarios

HP xw8000 Manual de usuario

Busca en linea o descarga Manual de usuario para Barebones Pc / Estación De Trabajo HP xw8000. Avid DNA HP xw8000 Configuration Guidelines Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Barebones Pc / Estación De Trabajo HP xw8000