HP B8C95AA Manual de usuario Pagina 255

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 490
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 254
HP Designjet T Series — Service Manual 6-19
Removal and Installation - Right Front Trim
Right Front Trim
Removal
1. Remove the Front Cover on page 6-16.
2. Remove the
Media Output Assembly on
page 6-17.
3. Remove two T-15 screws that secure the
Right Front Trim to the printer.
4. Open the Right Ink Cartridge Door by
applying sharp pressure to the right
side of the door and lifting firmly where
the door meets the Right Cover. Use your
hands. When the door is unclipped from
the pressure applied to the right side of the
door, you will hear a sound that
corresponds to the clip.
Do NOT use a screwdriver or other
tool to open the Right Ink Cartridge
Door.
5. Unclip the Right Front Trim.
Switch off the printer and remove the power cable.
Vista de pagina 254
1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 489 490

Comentarios a estos manuales

Sin comentarios