HP PSC-500 Manual de usuario descargar pdf (Pagina 25)

HP PSC 500 Setup Guide

2-3

TIP

If you are setting up a Windows NT 4.0 server that supports

Windows 95/98 clients, complete the following steps before

continuing.

Click Alternate drivers, and then click Windows 95.

After the message instructing you to insert the floppy disk appears,

click OK and insert the HP PSC Series CD-ROM.

In the Printer Drivers for Windows 95 dialog box, click Browse,

open the AddPrinter folder, open the w9x folder, and double-click

the hpo9508.inf file.

This allows the Windows NT 4.0 server to download the correct

driver to a Windows 95/98 client.

Click OK

to close the dialog box and store your changes.

Setting Up a Point-and-Print Client

Follow these steps to install the printing software on each client for either of

the following configurations:

Windows 95/98 server with only Windows 95/98 clients.

Windows NT 4.0 server with Windows 95/98 and/or NT 4.0 clients.

NOTE

A Windows 95/98 server cannot automatically download the software to a

Windows NT 4.0 client. For this configuration, follow the steps in “Setting Up a Peer-

to-Peer Client (95/98 server to NT 4.0 client).”

On the Windows desktop, double-click Network Neighborhood.

Find the name of the server that the HP PSC is directly connected to, and

double-click its icon.

The server window appears showing shared devices, including the share

name of the HP PSC.

Double-click the HP PSC’s share name.

After the setup message “Before you can use the printer...” appears, click

Yes and then wait several moments while the client computer establishes

a connection to the HP PSC.

After connecting to the shared HP PSC, the HP PSC 500 window

appears.

WLSG.book Page 3 Thursday, March 9, 2000 2:26 PM

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

HP PSC-500 Manual de usuario Pagina 25