Hp Jetdirect 280m 802.11b Wireless Print Server Manual de usuario descargar pdf (Pagina 162)

ENWW HP Jetdirect Configuration Page 21

AppleTalk Protocol Information

Information in this section of the Jetdirect configuration page

(Ethernet Only) is described in Table 9.9

. For error messages,

see Table 9.12

Table 9.9 AppleTalk Configuration Information

Message Description

STATUS: Indicates the current AppleTalk configuration status.

READY: Indicates the HP Jetdirect print server is awaiting

data.

DISABLED: Indicates that AppleTalk was manually

disabled.

INITIALIZING: Indicates that the print server is registering

the node address or name. An additional status message

may also be displayed.

An Error Code and Message is displayed if the print server

is not ready. For more information, see Table 9.12

NAME: The name of the printer on the AppleTalk network. A

number after the name indicates that there are multiple

devices with this name, and this is the Nth instance of the

name.

ZONE: The name of the AppleTalk network zone on which the

printer is located.

TYPE: The type of the printer being advertised on the network.

Two types can be displayed.

NETWORK

NUMBER:

NODE NUMBER:

NETWORK NUMBER: identifies the AppleTalk Network

Number on which the HP Jetdirect print server is currently

operating.

NODE NUMBER: identifies the AppleTalk Node Number

that the print server chose for itself as part of its initialization

sequence.

Note: The AppleTalk phase 2 (P2) parameter is

preconfigured on the HP Jetdirect print server.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 174 175

Sin comentarios

Hp Jetdirect 280m 802.11b Wireless Print Server Manual de usuario Pagina 162