HP OfficeConnect Router Series Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 112
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
39
Subnet Mask — The subnet for the address is automatically
configured but is not displayed.
ISP Gateway Address — The Gateway address from your ISP
to the Internet is automatically configured but is not
displayed.
Primary DNS Address — If your ISP requires the address of a
Primary DNS Server then enter it in the field labelled Primary
DNS Address.
Secondary DNS Address — If your ISP requires the address of
a Secondary DNS Server then enter it in the field labelled
Secondary DNS Address, otherwise leave the box blank.
Host Name — The Host Name of your computer may be
required by your ISP.
Clone MAC Address — Your ISP may require you to have a
particular MAC address. This will be the MAC address of the
computer you first used to connect with your ISP.
Click Apply to save any changes you have made.
Configuring a PPPoE connection
If your ISP has allocated you a dynamic address using PPPoE you
will have selected PPPoE (PPP over Ethernet) as your IP Allocation
Mode.
Figure 33 PPPoE Setup Screen
Your ISP may need you to enter host name or PPPoE settings. To
setup the Router for use with a PPPoE connection the following
fields will need to be completed:
IP Address — The internet address allocated by your ISP for
this connection is automatically configured and is not
editable.
PPPoE User Name — The user name you use to access your
ISP.
dua08609-5aaa01.book Page 39 Thursday, September 11, 2003 12:15 PM
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 111 112

Comentarios a estos manuales

Sin comentarios