HP StorageWorks Enterprise File Services WAN Accelerator Guía de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
26 2 - INSTALLING AND CONFIGURING THE HP EFS WAN ACCELERATOR
A standard electronic environment where the ambient temperature is between 10º
C
and 35º C (50º F and 95º F) and the relative humidity is between 10% and 90%
(non-condensing). For detailed information, see Appendix A, “Status Lights,
Technical Specifications, and Regulatory Information.”
Ethernet connections available within the standard Ethernet limit.
Space on a two or four post 19-inch rack.
A clean power source dedicated to computer devices and other electronic
equipment.
Required Tools and Equipment
You need the following tools and equipment to mount the HP EFS WAN Accelerator
to a rack:
A standard 19-inch Telco-type mounting rack. The HP ProLiant DL380-3010
and DL380-5010 require 2 Units (U) of rack space. The HP ProLiant DL320-
520, DL320-1020, and DL320-2020 require 1 U of rack space.
Appropriate screwdriver for screws if mounting into a threded-hole rack. Refer
to the instructions that came with the rack mount kit. Also refer to the
documentation that came with your system for important rack planning resource
instructions.
NOTE: If mounting a two-post rack, go to http://www.racksolutions.com/hp.
Completing the Configuration Checklist
Before you begin, consult the Rack Installation Guide for detailed information about
how to install your model to a rack.
The following checklist lists the parameters you specify to complete the initial
configuration of the HP EFS WAN Accelerator. Be prepared to provide values for the
parameters listed in the following checklist
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 103 104

Comentarios a estos manuales

Sin comentarios