HP Enterprise Flow 7000 s2 Guía de usuario descargar pdf (Pagina 30)

Clean the scanning strips

Clean both strips of glass inside the document feeder periodically, including any time a scanned image

has streaks. Lightly dust the small strips of gray reflective material if debris is present.

To clean these components, follow these steps:

1. Press the Power (

) button to turn off the scanner, and then disconnect the USB cable and power

supply from the scanner.

2. Open the document feeder hatch.

3. Clean the strips with a soft, lint-free cloth that has been sprayed with a mild glass cleaner.

CAUTION: Use only glass cleaner to clean the scanning strips. Avoid cleaners that contain

abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanning

strips. Avoid isopropyl alcohol because it can leave streaks on the scanning strips.

Do not spray the glass cleaner directly on the scanning strips.

24 Chapter 4 Care and maintenance ENWW

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 61 62

Sin comentarios

HP Enterprise Flow 7000 s2 Guía de usuario Pagina 30