HP ProLiant ML370 Generation 5 Especificaciones

HP ProLiant ML370 Generation 5 Server Maintenance and Service Guide June 2006 (First Edition) Part Number 404682-001

Customer self repair 10 Garantieservice "Parts Only" Het is mogelijk dat de HP garantie alleen de garantieservice "Parts Only" o

Customer self repair 11

Customer self repair 12

Customer self repair 13

Customer self repair 14

Illustrated parts catalog 15 Illustrated parts catalog In this section Mechanical components ...

Illustrated parts catalog 16 Mechanical components Item Description Assembly part number Spare part number Customer self repair (on page 5) 1

Illustrated parts catalog 17 Item Description Assembly part number Spare part number Customer self repair (on page 5) a) Wrap-around panel 389077

Illustrated parts catalog 18 1Mandatory: Obligatorio—componentes para los que la reparación por parte del usuario es obligatoria. Si solicita a HP

Illustrated parts catalog 19

© Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties

Illustrated parts catalog 20 System components Item Description Assembly part number Spare part number Customer self repair (on page 5) System

Illustrated parts catalog 21 Item Description Assembly part number Spare part number Customer self repair (on page 5) a) Dual-core, Intel® Xeon™ Pr

Illustrated parts catalog 22 Item Description Assembly part number Spare part number Customer self repair (on page 5) b) Receptacle, door snap, sto

Illustrated parts catalog 23 Item Description Assembly part number Spare part number Customer self repair (on page 5) c) 60-GB SATA, 5,000-rpm* 37

Illustrated parts catalog 24 1Mandatory: Obbligatorie—Parti che devono essere necessariamente riparate dal cliente. Se il cliente ne affida la ripar

Illustrated parts catalog 25

Removal and replacement procedures 26 Removal and replacement procedures In this section Required tools...

Removal and replacement procedures 27 Safety considerations Before performing service procedures, review all the safety information. Preventing ele

Removal and replacement procedures 28 These symbols, on power supplies or systems, indicate that the equipment is supplied by multiple sources of p

Removal and replacement procedures 29 Power down the server WARNING: To reduce the risk of personal injury, electric shock, or damage to the equi

Contents 3 Contents Customer self repair...

Removal and replacement procedures 30 3. Extend the server from the rack. Reverse the server installation steps in the documentation that ships with

Removal and replacement procedures 31 Access panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the int

Removal and replacement procedures 32 4. Remove the rack bezel. To replace the component, reverse the removal procedure. Feet NOTE: This proced

Removal and replacement procedures 33 Tower configuration panels To remove the component: 1. Power down the server (on page 29). 2. Remove the tow

Removal and replacement procedures 34 5. Remove the rail. 6. Repeat the steps to remove the other rail. To replace the component, reverse the remo

Removal and replacement procedures 35 Hot-plug power supply WARNING: To reduce the risk of electric shock, do not disassemble the power supply or

Removal and replacement procedures 36 2. Remove the blank. To replace the component, reverse the removal procedure. Hard drive To remove the compo

Removal and replacement procedures 37 Hard drive cage and backplane To remove the component: 1. Power down the server (on page 29). 2. Do one of t

Removal and replacement procedures 38 8. Remove the four screws that secure the drive cage to the chassis. 9. Remove the SAS cage. To replace the

Removal and replacement procedures 39 3. Remove the fan. To replace the component, reverse the removal procedure. Expansion slot cover To remove t

Contents 4 Diskette drive cabling ...

Removal and replacement procedures 40 To replace the component, reverse the removal procedure. Expansion board CAUTION: To prevent damage to the

Removal and replacement procedures 41 CAUTION: Make a note of board locations. Be sure to install replacements in the same slots. To replace the

Removal and replacement procedures 42 4. Remove the processor air baffle. To replace the component, reverse the removal procedure. Center wall To

Removal and replacement procedures 43 To replace the component, reverse the removal procedure. Media blanks To remove the component: 1. Power down

Removal and replacement procedures 44 4. Slide the media latch to release the drive and extend the drive from the bay to access the cabling. CAUT

Removal and replacement procedures 45 4. Press the HP Systems Insight Display ejector button to extend the HP Systems Insight Display. 5. Disconne

Removal and replacement procedures 46 WARNING: Always comply with all electrostatic and thermal guidelines to prevent bodily injury and ensure a

Removal and replacement procedures 47 6. Remove the FBDIMM. To replace the component, reverse the removal procedure. Processor CAUTION: To prev

Removal and replacement procedures 48 6. Remove the heatsink. 7. Open the processor retaining latch and the processor socket retaining bracket.

Removal and replacement procedures 49 8. Using your fingers, remove the failed processor. To replace the component: IMPORTANT: Be sure the proce

Customer self repair 5 Customer self repair HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow fo

Removal and replacement procedures 50 CAUTION: The processor is designed to fit one way into the socket. Use the alignment guides on the processo

Removal and replacement procedures 51 4. Close the processor retaining latch and the processor socket retaining bracket. 5. Clean the old thermal

Removal and replacement procedures 52 8. Close the heatsink retaining latches. 9. Install the processor air baffle. 10. Install the access panel.

Removal and replacement procedures 53 6. Remove the heatsink. To replace the heatsink: 1. Clean the old thermal grease from the heatsink and proce

Removal and replacement procedures 54 4. Close the heatsink retaining latches. 5. Install the processor air baffle. 6. Install the access panel.

Removal and replacement procedures 55 5. Remove the PPM. NOTE: The appearance of compatible PPMs may vary. To replace the component, reverse the

Removal and replacement procedures 56 8. Disconnect the signal cable from the power supply backplane. 9. Disconnect all cables from the system boa

Removal and replacement procedures 57 3. Remove the access panel ("Access panel" on page 31). 4. Remove all expansion boards ("Expan

Removal and replacement procedures 58 BBWC battery pack CAUTION: To prevent a server malfunction or damage to the equipment, do not add or remove

Removal and replacement procedures 59 5. Remove the battery pack. To replace the component, reverse the removal procedure. System board IMPORTAN

Customer self repair 6 • Obligatoire - Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à HP de remplacer ces pi

Removal and replacement procedures 60 11. Open the processor retaining latch and the processor socket retaining bracket. 12. Using your fingers, r

Removal and replacement procedures 61 15. Lift the system board out of the chassis and tilt it to one side to clear the cable guide. To replace the

Removal and replacement procedures 62 b. Remove the processor socket protective cover. 3. Install the processor socket cover onto the processor so

Removal and replacement procedures 63 5. Close the processor retaining latch and the processor socket retaining bracket. 6. Clean the old thermal

Removal and replacement procedures 64 2. Select the System Options menu. 3. Select Serial Number. The following warning is displayed: WARNING! WA

Removal and replacement procedures 65 5. Remove the battery. IMPORTANT: Replacing the system board battery resets the system ROM to its default

Cabling 66 Cabling In this section Cabling overview...

Cabling 67 SAS cabling NOTE: The center wall is removed for illustration purposes only. • SAS data cabling • SAS power cabling

Cabling 68 CD-ROM drive cabling Video cabling

Cabling 69 Parallel/serial port cabling BBWC option cabling

Customer self repair 7 In base alla disponibilità e alla località geografica, le parti CSR vengono spedite con consegna entro il giorno lavorativo s

Cabling 70 Internal USB connector Storage device cabling guidelines CAUTION: To prevent damage to the equipment, be sure that the server is powe

Diagnostic tools 71 Diagnostic tools In this section Automatic Server Recovery...

Diagnostic tools 72 • From within Survey Utility • From within operating system-specific IML viewers • For NetWare: IML Viewer • For Windows®: IM

Diagnostic tools 73 HP ROM-Based Setup Utility RBSU, an embedded configuration utility, performs a wide range of configuration activities that may i

Diagnostic tools 74 • Preparing the system for installing "off-the-shelf" versions of leading operating system software • Installing opti

Component identification 75 Component identification In this section Front panel components ...

Component identification 76 Item Description 6 DVD/CD-ROM drive 7 Removable media bays 8 Hard drive bays 1-8 • Tower model Item Description 1

Component identification 77 Front panel LEDs and buttons Item Description Status 1 UID button — 2 UID LED Blue = Activated Flashing blue = Sy

Component identification 78 Rear panel components Item Description 1 Keyboard connector 2 Mouse connector 3 USB connectors 4 iLO 2 management

Component identification 79 Rear panel LEDs Item Description Status 1 UID LED Blue = Activated Flashing blue = system is being remotely managed

Customer self repair 8 stellen. Im Falle von Customer Self Repair kommt HP für alle Kosten für die Lieferung und Rücksendung auf und bestimmt den Ku

Component identification 80 System board components Item Description 1 PCI Express slot 1, x4 2 PCI-X slot 2, 64-bit/133-MHz 3 PCI-X slot 3, 6

Component identification 81 Item Description 24 Internal USB connector 25 Serial 2 connector 26 Parallel connector 27 Diskette drive connector

Component identification 82 HP Systems Insight Display LED color Internal system health LED color Status PPM failure, slot X (amber) Red One or mor

Component identification 83 SAS and SATA hard drive LEDs Item Description Status 1 Fault/UID LED Amber = Drive failure Flashing amber = Fault

Component identification 84 Online/activity LED (green) Fault/UID LED (amber/blue) Interpretation Flashing regularly (1 Hz) Off Do not remove the dr

Component identification 85 Item Description 8 FBDIMM slot 8, bank D Power supply backplane LED If the power supply backplane LED is illuminated,

Component identification 86 Item Description Configuration 5 Fan 5 Redundant 6 Fan 6 Redundant Systems Insight Display LEDs To view a quick r

Component identification 87 Item Description Status 9 Processor 2 LED Amber = Failure Off = Normal 10 PPM 2 LED Amber = Failure Off = Normal 11

Specifications 88 Specifications In this section Environmental specifications...

Specifications 89 Specification Value Weight (maximum) 40.8 kg (110 lb) Weight (when lightly loaded) 24.9 kg (55 lb) Input requirements Rated inpu

Customer self repair 9 Para obtener más información acerca del programa de Reparaciones del propio cliente de HP, póngase en contacto con su proveed

Specifications 90 Specification Value Drives supported 1 Drive height One-third height Drive rotation 300 rpm Transfer rate High 500 Kb/s Low 250

Specifications 91 Specification Value Track pitch 1.6 µm (6.3 × 10-7 in) Cache/buffer 128 KB Startup time < 10 s Stop time < 5 s (single); &

Acronyms and abbreviations 92 Acronyms and abbreviations ABEND abnormal end ASR Automatic Server Recovery BBWC battery-backed write cache BIOS Ba

Acronyms and abbreviations 93 NMI non-maskable interrupt NVRAM non-volatile memory ORCA Option ROM Configuration for Arrays PCI Express periphera

Acronyms and abbreviations 94 SIM Systems Insight Manager SNMP Simple Network Management Protocol UID unit identification USB universal serial bu

Index 95 A AC power supply 79 access panel 31 air baffle 28, 41 ASR (Automatic Server Recovery) 71, 92 Automatic Server Recovery (ASR) 71,

Index 96 LEDs, SATA hard drive 83 LEDs, Systems Insight Display 86 M management tools 71 media drive 43 media drive blank 43 memory boards

Index 97 V video connector 75