HP AdvanceStack Router 230 Manual de usuario descargar pdf (Pagina 47)

3. Specify the X.25 circuit type—DDN, PDN, or PTOP (the default). (If

you don’t want PTOP, type ddn or pdn for the type of X.25 circuit,

then press [Return].)

• If you specified DDN for the circuit type, no more parameters are

needed for the default configuration. Go to step 4 on page 3-22.

• If you specified PDN, you will need to enter the local DTE

address, the IP address, and the X.121 address, as follows:

Note Use the [Return] key to bypass fields that already contain default values.

– Local DTE address for PDN: Type / l (the [/] and [L]

keys), enter the X.121 address of the local port at ‘‘Local DTE

Address’’, and press [Return] as many times as needed to return

to Quick Configuration. (Refer to figure 3-15 on page 3-21.)

– IP address and X.121 address for PDN: Type / r, enter

the IP address and X.121 address of the remote port, and

press the [Return] key as many times as needed to return to the

Quick Configuration screen. (Refer to figure 3-16 on page

3-21.)

• If you specified PTOP, you will need to enter the local DTE

address, the remote DTE address, and the connection ID, as

follows:

– Local DTE address: Type / l (the [/] and [L] keys), enter

the X.121 address of the local port (at ‘‘Local DTE Address’’),

and press [Return] as many times as needed to return to the

Quick Configuration screen. (Refer to figure 3-17 on page

3-22.)

– Remote DTE address and Connection ID: Type / r,

enter the X.121 address (at ‘‘Remote DTE Addr’’) and the

Connection ID of the remote port, then use [Return] to return to

the Quick Configuration screen. (Refer to figure 3-18 on page

3-22.)

Note If you want to add more connection IDs, type / l instead of / r. Then

use [Return] to step past Local DTE Address. When you see ‘‘1. X.25

Virtual Circuits’’, type 1 and press [Return], then select the ‘‘Add’’ op-

tion. For more on how to use the Configuration Editor, refer to chapter 4.

How To Use Quick Configuration

How To Configure for X.25

3-20

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 155 156

Sin comentarios

HP AdvanceStack Router 230 Manual de usuario Pagina 47