HP E3000/IX Manual de usuario descargar pdf (Pagina 110)

110 Chapter7

Conﬁguring a Point-to-Point Node

Conﬁgure a Point-to-Point Network Interface

Step 5. Tab to the Speed ﬁeld. Enter the line transmission speed of this link.

Step 6. Tab to the Type ﬁeld. Enter DD for direct dial, SD for shared dial or DC

for direct connection.

Step 7. Tab to the Card Type ﬁeld. Enter LAPBMUX if ACC adapter is being

used, or LAPB for a PSI adapter. Do not mix both Card Types under

the same NI.

Step 8. Press the

[Save Data] key to record the data you have entered.

Step 9. If you need to identify neighbor gateways, press the [

Neighbor Gateways]

key and proceed to the section in this chapter called “To Conﬁgure

Neighbor Gateways.”

Step 10. If you have already conﬁgured neighbor gateways for this link or your

network contains no neighbor gateways, press the

[Link Routing] key

and proceed to the section in this chapter titled “To Conﬁgure Node

Mapping.”

Optional Keys Press the

[List NIs] key to list the names and types of

already conﬁgured network interfaces.

Press the [Delete NI] key to remove a conﬁgured network

interface from the conﬁguration ﬁle.

Press the [Read Other NI] key to call up a previously

conﬁgured Network Interface name.

There are two methods of entering an internet protocol (IP) address

within NMMGR:

Fields Node name

Display only.

Network Interface (NI) name

Display only.

IP address

The IP address is an address of a node on a network. An

IP address has two parts: a network portion and a node

portion. The network portion must be the same for all

nodes on a LAN network; the node portion must be

unique for all nodes on a LAN network.

1. Enter the fully qualiﬁed IP address (for example, Class C,

C 192.191.191 009).

2. Enter only the network (nnn) and node (xxx) portions of the IP

address as four positive integers between 0 and 255 separated by

periods or blanks (for example, 15.123.44.98).

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 231 232

Comentarios a estos manuales

Sin comentarios

HP E3000/IX Manual de usuario Pagina 110

Comentarios a estos manuales

Relacionado con productos y manuales para Manuales de software HP E3000/IX