HP 200 Manual de usuario Pagina 623

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 676
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 622
4. Circuits (Continued)
Circuit Type = V.25 bis adapter (Continued)
1. Adapter record
Connect when
Minimum connect duration (sec)
Connect retry count
Connect wait time (sec)
Connect inactivity time (sec)
Send CIC on all allowed INC’s
Delay after connect failure (min)
Per channel Bandwidth
Min channels to aggregate
Max channels to aggregate
Channel Management
1. Outbound call number
Remote station Number
Subaddress
2. Allowed inbound call numbers
Allowed Number
Subaddress
3. Local number (Used for collision avoidance)
Remote Station Number
Subaddress
2. Bandwidth Reservation
Percent of queue reserved for high priority pkts
Percent of queue reserved for normal priority pkts
Percent of queue reserved for low priority pkts
Circuit Type = Frame Relay
DLCI Encoding Type
DLCI Encoding length
Maximum packet size
Provide InARP
Max Link Latency (ms)
Management Type
A: Parameter Finder
A-8
Vista de pagina 622
1 2 ... 618 619 620 621 622 623 624 625 626 627 628 ... 675 676

Comentarios a estos manuales

Sin comentarios